CE marking

CE-Marking Test Instruments in Conformity with EU Standards.

CE marking indicates that a product is in conformity with relevant directives specified by the “New Approach Directives.” These are a set of safety regulations required for a product to be sold within the European Economic Area, EEA. As part of our Global Delivery Model, we obtained the CE marking and declare conformity that our products meet the requirements of the applicable EU directives for the following products:

Xenon Weather Meter GX75CE(7.5kW)

High performance – 7.5kW Water-Cooled, Xenon. Irradiance and temperature direct control on specimen.
Conforms to ISO, IEC, SAE, ASTM, AATCC, JIS and JASO standards etc.

Super Xenon Weather Meter SX75CE(7.5kW)

Capable of super-accelerated tests with irradiance three times higher than that of solar ultraviolet (180W/m2),meeting the expectation of today’s high-speed product development.
Conforms to ISO, IEC, SAE, ASTM, AATCC, JIS and JASO standards etc.

Combined Cyclic Corrosion Test Instrument CYP-90CE

A compact combined cyclic test instrument capable of either single or combination of salt spray, dry, wet, and open air tests. It is widely used both in Japan and in overseas as a standard combined cyclic test instrument capable of performing ISO, IEC, JIS and JASO standards etc.

Combined Cyclic Corrosion Test Instrument CCT-2LCE

Combined cyclic corrosion test instrument, capable of automatically performing cyclic tests to reproduce actual use conditions. Variations in the distribution of temperature, humidity, and sprayed salt solution at the specimen plane is minimized and the transition time between test steps can be controlled accurately.All-in-one type test instrument.
Conforms to ISO, IEC, SAE, ASTM, JIS and JASO standards etc.

Colour Cute CC-iCE

An all-in-one tristimulus colorimeter. Measures reflectance and transmittance. Equipped with a touch panel screen for easy, convenient operation.
Conforms to ISO, ASTM and JIS standards.

Haze Meter HZ-V3CE

Measures the transparency and haziness of transparent materials such as plastics, glass, liquids, LCD’s, films and encapsulants. Conforms to ISO, ASTM and JIS standards.

Radiometer RAX34CCE

Accurately measures and calibrates a xenon weather meter’s irradiance at the specimen’s surface.

Suga Abrasion Tester NUS-ISO3CE

Flat-surface abrasion testing instrument with high reproducibility using a rotating wheel.The specimen, which is set facing downwards, is abraded by reciprocal motion against a strip of abrasive paper attached to the outer circumference of a wheel.
Conforms to ISO, ASTM and JIS standards.

Visible Light Transmittance/Reflectance Meter HA-TRCE/HA-TCE

This product is used for measuring visible light transmittance and/or reflectance of car windows, plastic films, etc. HA-TRCE is reflectance/transmittance measuring type, while HA-TCE is dedicated transmittance measuring type. Conforms to JIS standards.

Gravel Chipping Test Instrument JA400LACE

This instrument is for testing and evaluating the chipping resistance of surface coating and break tubes by gravel impact.
It is also capable of performing low-temperature gravel impact tests.
Conforms to SAE, ASTM and JASO standards.

pagetop